TPK – 80 x 3000

Tokarka konwencjonalna TPK-80 po kapitalnym remoncie wykonanym przez firmę Blachmix.

 

 

 

 

 

Producent – Poręba
* Po remoncie kapitalnym w 2016

* Średnica toczenia [mm] – 800
* Średnica toczenia nad suportem [mm] – 530
* Długość toczenia [mm] – 3000
* Przelot wrzeciona [mm] – 95
* Waga elementu obrabianego [kg] – 6000
* Wymiary gabarytowe [mm] – 5500 x 1800 x 1800
* Waga maszyny [kg] – 6100

NEW CENTRE LATHE CONVENTIONAL TR3-135 x 2000 mm

We are pleased to inform you that our factory produced another new conventional lathe type TR3-135 for our customer from India. The lathe has turning length 2000 mm, swing over bed fi 1350 mm and load carrying capacity between centers 9 t with steady rest even up to 15 tons. On the request of customer the lathe could be equipped in steady rolls, another systems of tool post, etc.

 

 


 

 

NOWA TOKARKA KŁOWA KONWENCJONALNA TR-135 x 2000 mm

Miło nam Państwa poinformować, że w naszym zakładzie wyprodukowaliśmy kolejną tokarkę konwencjonalną typu TR-135 dla naszego klienta z Indii. Tokarka ma długość toczenia 2m, przelot nad łożem fi 1350 mm i jest w stanie obrabiać detale o masie 9 ton, a z podtrzymkami nawet do 15 ton. Na życzenie klienta możliwe jest wyposażenie tokarki w podtrzymki, inne systemy narzędziowe itd. Continue reading „NOWA TOKARKA KŁOWA KONWENCJONALNA TR-135 x 2000 mm”

RENOVATION MILLING AND DRILLING ATTACHMENT

We kindly inform you that we have finished works on the renovation of milling and drilling attachment for heavy duty lathe for our customer from United States of America.

Parameters of the milling and drilling attachment: main motor power 1.5 KW, 3x460V/60Hz, 6 spindle speeds within the range 75-750 rpm, spindle taper ISO 40. Renovation included the following works:

  • disassembly of the milling attachment;
  • inspection and replacement of all mechanical parts;
  • professional assembly of the milling attachment;
  • replacement of all bearings seals an V-belts;
  • geometry inspection according the Test chart;
  • painting as per customer requirements;

All the works were done by highly qualified staff – experienced engineers and technicians of company PORĘBA MACHINE TOOL.

The works included an updated maintenance Manual of the milling attachment within the scope of renovation.

The works are under 12 month guarantee .